DLyte 10,000

DLyte 10,000 can be easily integrated in any production line that involves highly complex grinding and polishing processes.

MAIN DATA

Capacity (per cycle)

750 Ø x 600 mm (one piece centered to the robot axis).

Operating height

4,500 mm

Operating layout

5,718 (front) mm x 4,507 (side) mm. (Recommended safety area: 8,110 mm x 9,307mm)

Floor requirements

 

It is recommended that the quality of the concrete must meet the requirements of the following standard: C20/25 according to DIN EN 206-1:2001/DIN 1045-2:2001 for a weight machine of 7,450 km without the scaffold (950 kg).

Power consumption

55 kw (125A)

Power supply

380 – 400 VAC / 50-60 Hz / 3P + N + GND

Air pressure main

Main line: 6–8 bar (air connector: 16 mm Ø) Consumption of 3,000 l/min. Air quality must be 1.5.1 according to ISO 8573.

Distilled water

70 l. demineralized water tank with conductivity properties < 5 μS/cm according to ISO 3696.

Ventilation

The unit must be installed in a well-ventilated area. Otherwise, a forced ventilation system must be installed on top of the unit.

OUR OFFER

DLyte 100l

Perfect for treating Steel-based materials, Cobalt-Chrome, and Copper- and Nickel-based alloys group with low-frequency parameters.

DLyte PRO500

The DLyte PRO500 performs high-quality metal surface finishing more precisely, swiftly and efficiently with processing times ten times better than current technologies.

EMAIL US

Name and Surname
Privacy information
PRES-X will use the personal data you provided above to respond to your question or comment. Sandvik does this to fulfill our legitimate interest in providing you efficient service.

Your personal data will be stored as long as necessary to meet the purpose set out above. This means that your personal data is generally stored for as long as needed to service your request.

You may always exercise your rights, such as to access or rectify your personal data or request us to stop processing it. For more information about your rights, go to our data privacy page.
Policy Agreement(Required)